Hot Water Cylinders Faversham

Quality Hot Water Cylinders - Clarke’s Gas Services

Here at Clarke’s Gas Services, we offer absolutely fantastic hot water cylinders to clients throughout Faversham and the surrounding areas. Regardless of what you require from your hot water cylinder in Faversham, we guarantee that ours will exceed your expectations. There are two different types of hot water cylinders found in homes today, the newer pressurised unvented hot water cylinders, and the older style vented hot water tanks.

Unvented hot water cylinders were only made legal in the UK in 1986, and have rapidly grown in popularity. In an unvented system, there is no cold water tank, the sealed hot water cylinder is fed by the cold water mains instead. Due to the fact that they’re operating at mains pressure, they offer much better flow rates, which means your shower and bath performance should be higher.

Hot Water Cylinders

What Is A Hot Water Cylinder?

A hot water cylinder is also called a hot water tank, hot water storage tank, thermal storage tank, hot water thermal storage unit or a heat storage tank. It is a water tank used for storing hot water for space heating or domestic use. A properly insulated hot water cylinder can retain stored heat for days, helping to significantly reduce fuel costs.

Vented hot water cylinders are the most common type of hot water cylinder found in the UK. Unlike the newer unvented tanks, they are fed by cold water from a header tank which is normally found in the loft of a home. A vent pipe links the vented hot water cylinder and the cold water in the header tank.

The hot water cylinders that we offer throughout Faversham are a lot less complicated than the pressurised vented systems, and they’re also easy to maintain and install. This also makes them a much more cost effective option to heated water within your home.

Central Heating Systems

Here at Clarke’s Gas Services, we have worked with many different types of heating systems and so you can trust that you are in the best hands. With our experience, with have developed our expertise over the years and have been able to provide a fully comprehensive service for those in Faversham and the surrounding areas. There are two types of hot water cylinders:

Unvented – this is a pressurised system which connects directly to the cold mains water. This means that they don’t need a separate cold-water storage tank, which allows you for more space in your rooms.

Vented – this is the more most conventional form of central heating. This cylinder is connected to a separate cold water storage tank which supplies water to the hot water cylinder. The water is heated either by an immersion heater or by the central heating boiler.

If you need more information about how a how water cylinder works, or how we can help you, get in touch today and we will be more than happy to answer any questions you may have.

Get In Touch For Hot Water Cylinders in Faversham

If you require additional information on the truly high quality hot water cylinders that we offer throughout Faversham and the surrounding areas, be sure to get in touch with the team at Clarke’s Gas Services today. We’re always here and on hand to take your call, answer any questions and deal with any enquiries that you may have about the hot water cylinder products and services that we offer to clients in and around the Faversham area. We look forward to taking your call and assisting you in any way we possibly can.

 

We also provide this service in the following locations:

This is most likely due a fault in the system. Depending on the situation, you will most likely need a complete heater replacement or just a stat. Give us a call today and we will be able to help to assess the condition of your hot water systems and come to a solution.

If there is any leakage of water, then make sure that you turn off any of the electrical supplies to it from the mains. After doing this, make sure that you call a professional to deal with the problem. Never attempt to fix any issues if it is related to electricity as you could make the problem work and even cause risks to your health.

A direct cylinder is an electric type of water heating which heats the water through one or more immersion heaters. An indirect cylinder on the other hand, has a coil inside although they usually have an immersion heater as well to help heat up the water.